Bright minds: Banner K50 Pro touch buttons
The easier it is to control and visualise a machine or plant, the higher its efficiency and the lower the error rate. The K50 Pro touch buttons from Banner offer a wide range of signalling options and drastically reduce the number of components.
Machine and plant manufacturers are forever called upon to increase user productivity and guarantee maximum process security using intelligent concepts. Operators needs to have an overview of the machine status and process sequence at all times. Control and visualisation must function perfectly even under difficult conditions. And that’s not all: gloves, wet hands and other circumstances must not hinder operation.
A wide range of products for a wide range of applications
The K50-series touch buttons from Banner are the ideal solution in every respect. These visualisation systems combine user-friendly touch technology with the robustness and diversity of RGB LEDs. The highly flexible, reliable solution from Banner is ideal for pick-to-light and call button applications in a variety of industries and environments. The buttons also have IP67 and IP69K protection classes, which means they can be used in high-pressure and steam-jet cleaning scenarios without any problem.
Easy to program and adaptable in many ways
The K50 Pro touch buttons are available in 50 mm domed or flat design. They can be quickly and easily programmed using the Pro Editor software and Pro Converter cable from Banner. What’s more, the colours and animations can be adjusted to any application. Each touch button can display up to 14 colours. The water-resistant, finely balanced touch technology reacts to the lightest touch and offers full functionality even if the operator is wearing protective gloves.
IO Link for customised status displays
The IO Link-compatible models have all the Pro functions and are managed dynamically via an IO Link master port. IO Link communication broadens the range of colour signal and animation options almost immeasurably: from blinking and dimming, to rotating and flashing and even multi-colour animations.
These bright minds are also available from Bachofen. Contact us for a personal consultation for a real insight into the wide range of Banner K50 touch buttons available, ensuring you make the right choice.
Downloads
You can finde the Touch Buttons in the online shop
Discover more products from Banner
Areas of application
Enlightening perspectives
Other focus topics in the area of machines, installations, equipment, machine tools and assemblies
Lights that speak: the new WLS27 pro-lights from Banner
When monitoring machinery, processes, actions or user behaviour, speed and clarity are paramount. The most efficient medium for these purposes is light. With its new WLS27 Pro-lights that are...
Out into the field: CODESYS-3 controller TBEN-Lx-PLC from Turck
Some machine manufacturers are still hesitant when it comes to relocating controllers into the field, even though the benefits of decentralization are very clear. The CODESYS-3 controller TBEN-Lx-PLC from...
One IP address for an entire sub-network: all thanks to beep from Turck
With the TBEN-S, TBEN-L and FEN20 fieldbus modules, Turck is opening up new possibilities for machine and plant manufacturers. Each device on a network can be reached via an...
Tiny but mighty: the new HRG miniature roller guide from THK
A linear guide should take up minimal space but also deliver maximum performance. This contradiction inevitably leads to compromises when evaluating the options. But this is now a thing...
Solutions and expertise to meet your needs: Bachofen Engineering
As a rule, manufacturers come under a lot of pressure in terms of time, costs and innovations. And on top of that, they are faced with consistently high customer...
Say goodbye to (compressed) air pollution: quality is guaranteed
Compressed air is an important medium that is vital in virtually every manufacturing process. However, it must be clean and supplied without losses to the individual workplaces, otherwise it...
Procurement made easy: Bachofen safety technology from a single source
There are many aspects to the safety of machines, plant and vehicles. However, designers and operators have more important things to do than be setting up an evaluation process...
Prime example for industry 4.0: the machine thinks along with you
Is the tool suitable for the next processing step and when is the next service due? This information is crucial for ensuring that manufacturing runs smoothly with no long...
Prevention is better: monitoring using the Edge Gateway from Turck
Many operating faults in machinery and systems go undetected until the process itself starts to falter. If the operation was permanently monitored, any functional faults that were about to...
Personal protection: prevention thanks to building technology
The statutory provisions in the field of building technology and the construction industry specify strict guidelines when it comes to personal protection. There is a good reason for this:...
Diversity and quality combined: Parker Rectus connection technology
Need to disconnect fluid connections quickly, cleanly and without any tools? Then look no further than the Rectus couplings from Parker. Parker has the right coupling for every conceivable...
Out of the control box: towards decentralised concepts
In the world of Industry 4.0, modularity is gaining increasing importance in the manufacture of machinery and systems. This development is also promoting the decentralisation of I/Os and control...
Optical sensor: green light for LED
Machine are carrying out increasingly complex functions and are increasingly networked, reflecting Industry 4.0. This also results in higher demands on the optical sensors. The future lies in LED...
On the move at high speed: the new BSM ball screw from THK
When speed is required, conventional ball screws quickly reach their limits. Traditional types have a DN value of between 60,000 and 120,000. THK’s new BSM ball screw exceeds these...
Eagle eyes in the compressed air network: flow sensors from EGE
Compressed air is expensive. One cubic meter can easily cost 10 to 20 Swiss centimes. Too much to waste. Flow sensors from EGE with IO Link display leakages immediately...
Modbus-compatible and networked: electric actuators from Valpes
The ability of measurement and control systems to communicate is of central importance to the safe operation of systems. Electric actuators from Valpes can be configured and controlled using...
Manpower: too good for repetition and routine
High-performance machine guarantee a high level of productivity thanks to efficient production. This is compromised if an operating person is required to load and unload the machine. DENSO robots...
Pushing in fast beats screwing in slowly: Carstick+ push-to-connect cartridge from Parker
Finding space- and time-saving solutions is becoming increasingly important in equipment manufacturing. This applies to all areas of the process. Parker has enhanced the Carstick® push-in cartridge for the...
It’s not worth getting mad: measurement is better
Compressed air costs money, as fast-running compressors consume expensive energy. It is therefore not just annoying when compressed air disappears into thin air but also costly in the long...
IP protection for peace of mind: monitoring in the control cabinet
The heart of IT systems lies in the control cabinet. This means that it is even more important to ensure that it is protected against physical influences such as...
Interference-free wireless: say goodbye to interference
Wireless networking is a key element of Industry 4.0. It is, however, difficult to implement in industrial environments. Until now, interference and long distances have affected the wireless transfer...
Distance yourself from mediocrity: the Turck uprox® 3 factor 1 sensors
Inductive sensors, for applications in special machine engineering and other demanding fields, should ideally have high switching distances, be compact and form a key element for reliable machine and...
Hot tip for mechanical engineers: motor-driven proportional valve
Handling hot liquids can cause manufacturers to break out in a sweat, as it poses particular challenges for valve technology. That is why those who are able to keep...
Bringing up the curtain on improved safety: New high-capacity safety light grids from Banner
Although ensuring machine safety often has no direct benefit on productivity, it is nonetheless too important to be ignored. Accidents involving personnel can have dramatic consequences for those affected...
Monitoring and visual display in a single device: The new K30 Pro optical sensor from Banner
Monitoring a process is one thing — displaying its status is another. To date, a separate device has been required for each of these two functions. Now, however, automation...
The end to loose contacts: The M12 Power Portfolio from Turck
If the power supply to a machine or plant is in jeopardy, a whole host of other things can go wrong. The risk of interruptions and failures is particularly...
Maximum precision in miniature measuring ranges: Inductive sensors with IO-Link from Turck
Measurements in micro dimensions can be too much for conventional sensors to handle. The range of measuring sensors available on the market is extremely small, especially in cases where...
Increased energy efficiency in the compressed air system:
The operation of compressed air systems is energy intensive. This makes it all the more important to constantly control the flow rate and, if necessary, take appropriate steps to...
Lights on for increased productivity: Industrial lighting range from Banner
Even though your workplace might be filled with the brightest minds, if the lighting isn't right, the risk of mistakes and quality losses increases enormously. What's more, outdated lamps...
Perfect for sustainability: Compressed air blow guns from Parker Legris
Cleaning with compressed air is fast and effective. But what about the energy usage? Parker Legris compressed air blow guns are fully in line with the trend towards sustainable...